DO NOT USE AFFLIATE CODE AT CHECK OUT

OSC Tumbler Invasion T-Shirt Designs DTF Print to press yourself with T-Shirt press onto your own shirt.  (An easy press may not provide adequate pressure for DTF).   Each combo pack will come with (1) 4" pocket OSC logo for front and (1) 10-11" Design for back.

General Settings:

POLY & TRI BLENDS: 290 F for 10 seconds

50/50: 300 F for 12 seconds

COTTON: 300 F for 15 seconds

Hoodies/Sweatshirts 320 F for 15 seconds

For a matte look for the transfer, press a second time with Kraft Paper for 10 seconds.

Standard Film DTF Transfer Application Instructions

1. Preheat the garment for 15 seconds to remove excess moisture. Let the garment cool before adding the transfer.
2. Place the transfer on the shirt- white side down, image facing up.
3. Press at 290-320 for 15 seconds under very firm pressure. (A Cricut easy press or handheld iron may not provide adequate pressure for DTF)
4. Remove the garment from the press and let it stand until it is cool enough to peel.
5. Peel once cool. *** Please note: If the image does not come off completely, repress with the transfer in place, let it cool, and re-peel the film.***
6. Cover the image with parchment paper and press again for 10-15 seconds. You can use a Teflon sheet, butcher paper, or tissue paper.